Metal roofing is not one product. When homeowners in New Hampshire ask us for a metal roof, they usually have a picture in their head of clean vertical lines and no visible fasteners — and that specific thing is standing seam. It is the most expensive metal option, the longest-lived, and the one most worth understanding before you compare quotes, because contractors quoting “metal” may be quoting something quite different.
What Standing Seam Actually Is
Standing seam is made of long metal panels running from ridge to eave, joined by raised vertical seams. The fasteners sit under the panels, clipped to the deck and hidden by the seam itself. Nothing penetrates the weather surface.
That single detail is most of the reason it lasts. On an exposed-fastener metal roof — the corrugated or ribbed panels you see on barns and garages — screws go through the face of the panel into the deck, each with a rubber washer. Those washers are the weak point. They harden, shrink and back out over fifteen to twenty years of New Hampshire freeze-thaw, and every one of them is a potential leak. Standing seam has no such holes.
The Three Things You Might Be Quoted
- Standing seam — concealed fasteners, vertical panels, longest service life, highest cost.
- Exposed-fastener panels — corrugated or ribbed, screwed through the face. Much cheaper, perfectly good on a barn or detached garage, and a compromise on a house.
- Metal shingles or shakes — stamped panels that mimic slate or wood. Installed more like shingles, often chosen where a standing seam look would not suit the house.
If you are collecting quotes, make sure you know which of the three each one is for. The price difference between them is substantial, and a quote that just says “metal roof” is not comparable to anything.
Why It Suits This Climate
It sheds snow instead of holding it
This is the real argument for metal in New Hampshire, and it is not about snow load — your roof structure handles that. It is about ice. Ice dams form when snow sits on a roof long enough for heat escaping from the attic to melt the underside of it, sending meltwater down to refreeze at the cold eave. A smooth metal surface sheds snow in sheets before that cycle has time to run.
It is not a substitute for proper ventilation and air sealing — nothing is — but on a house that dams every winter despite reasonable attic work, metal genuinely changes the picture.
It handles wind at the edges
Asphalt roofs almost always fail first at the ridge cap, starter course and drip edge, because wind lifts individual shingles. Standing seam has no individual pieces to lift — the panel runs the full slope and is locked at the seams. On exposed sites, which in our area means anywhere coastal and anywhere on high open ground, that matters.
It outlives the people who install it
A properly installed standing seam roof is generally expected to last fifty years or more, against roughly twenty to thirty for architectural asphalt in this climate. Our guide to how long a metal roof lasts goes into what actually determines that in practice.
What It Costs
Standing seam is typically two to three times the installed cost of an architectural asphalt roof on the same house. That is a wide range because the variables are wide: panel gauge and finish, how cut up the roof is, how much flashing detail there is around chimneys and dormers, and whether the old roof comes off first.
Complexity hurts metal more than it hurts asphalt. A simple gable roof is close to ideal for standing seam — long uninterrupted runs, few penetrations. A roof with five dormers, two valleys and a chimney needs far more custom flashing work, and the gap between the metal and asphalt quotes widens accordingly.
We will not quote you a number on a web page without seeing the roof, and you should be wary of anyone who does. Our breakdown of metal versus shingle cost walks through the trade-offs in more detail, and financing with $0 down is available if the up-front difference is the sticking point.
The Part Nobody Mentions: Snow Guards
Shedding snow is the main benefit and also the thing that catches people out. A standing seam roof does not release snow gradually. It holds it until conditions change and then drops the whole slope at once, usually without warning.
That is fine over a lawn. It is not fine over a front door, a walkway, a deck, a driveway where cars park, a gas meter or an oil fill. Snow guards — small devices fixed to the panels that break the slab up and let it release in manageable amounts — belong in the plan from the start, not as an afterthought the first winter.
If a standing seam quote you are looking at does not mention snow retention anywhere, ask about it before you sign.
When We Would Tell You Not To
- You are moving within a few years. You will not recover the premium in resale, and the next owner gets the benefit.
- The roof is very cut up. On a heavily dormered, multi-valley roof the cost climbs steeply and the clean look that attracted you in the first place is largely lost.
- Your real problem is the attic. If you are considering metal mainly to stop ice dams, get the ventilation and air sealing assessed first. Sometimes that fixes it at a fraction of the cost, and we would rather tell you so.
- The house is in a historic district. Some exterior changes need review before you commit to a material or colour. Worth checking with the town early.
A common middle path is metal on part of the house — a porch roof, a sunroom, or a shallow lower slope where asphalt struggles and snow tends to sit — with architectural asphalt on the main roof. That gets you the functional benefit where it counts without the full cost.
Getting It Installed Properly
Standing seam is less forgiving than asphalt. Panels expand and contract with temperature across their whole length, so the clip system has to allow that movement — panels fastened rigidly will oil-can, distort or tear at the fixings. Flashing at chimneys, walls and valleys is fabricated rather than bought off a shelf. There is no way to hide a bad job under the next course.
Ask whoever is quoting how many standing seam roofs they install in a year. It is a legitimate question and the answer tells you a lot.
Standing Seam FAQs
Is a Metal Roof Noisy in the Rain?
Far less than people expect. The noise everyone remembers is from metal over open framing — a barn or a porch roof with nothing underneath. On a house the panels sit over solid decking, underlayment, insulation and a ceiling, and most homeowners say it is no louder than asphalt.
Can You Install Metal Over My Existing Shingles?
Sometimes it is possible, but we generally recommend against it. Going over the old roof means nobody inspects the decking, and on a fifty-year roof system that is a poor trade for a modest saving. Tearing off also lets us install ice-and-water barrier properly at the eaves and valleys, which is the part that protects the house in a New Hampshire winter.
Will It Make My House Colder in Winter?
No. A roof is not what keeps your house warm — your attic insulation is. Metal reflects more summer heat than dark asphalt, which helps in July, but it makes no meaningful difference to heating in January either way.
Can You Install It in Winter?
Yes, and metal is actually the easier material to install in cold weather — it is mechanically fastened and has no temperature-dependent adhesive strip to worry about. The constraints in winter are daylight, snow and ice underfoot rather than anything to do with the material. Our guide to replacing a roof in winter covers the detail.
Thinking About It?
We install standing seam, metal shingles and asphalt, which means we have no particular reason to push you toward one. If metal is not right for your roof we will say so.
We are a family-owned contractor based at 43 North Road in Deerfield, working across southern New Hampshire and southern Maine, and an Owens Corning Preferred Contractor with a 25-year transferable workmanship guarantee on every installation. Get in touch for a free estimate — we will walk the roof, talk through what each option would actually cost on your house, and leave you to think about it.







